Cold chainthat travels.
The Move was built for the field. Vacuum insulated panels and PCM in a rugged carry bag, validated to the same standard as the Cube, for specimen collection and wherever a rigid shipper can’t follow.
The configuration that survives a heatwave is the one that survives a freeze.
Seasonal re-qualification costs time, money, and a separate BOM your team has to manage, train for, and audit. The Move eliminates it. One system. Every season. Pack it the same way in July or January.
Summer ambient profile. ISTA 7D pass
Winter ambient profile. ISTA 7E pass
Identical pack-out across all seasons
No seasonal swap of components
Where the cold chain walks.
The Move goes where soft coolers fail and rigid shippers can’t follow, clinical corridors, field sites, and last-mile routes that still demand validated, documented cold chain.
In the rig, on the scene.
Medications need to stay at temperature whether they're in the ambulance or on scene. The Move delivers validated cold chain performance in a carry bag built for the demands of emergency medicine.
Validated VIP hold through every call
Rugged carry bag for the rig and the scene
Wipes down and returns to service between runs
Engineered for the last mile.
The Move ships with the same insulation panels and PCM plates that earn the Cube its qualification, lab-proven, then built into a bag made for on the go.
Integrated VIP Lid
The lid features a vacuum insulated panel (VIP) and foam that creates an air gap barrier against the tub flange, keeping the same thermal performance as the walls.
The Patented Tub
The five-sided tub works as a system with the PCM plates; it's washable and built to reuse. It protects the VIPs, contains spills, and absorbs impact to meet drop test and real-world requirements.
VIP Wall Panels
Every side is lined with a silica-core vacuum insulated panel, the highest-performing insulation available. Protective foam keeps each VIP secure, dampens vibration, and eliminates air gaps against the tub.
PCM Plates
PCM plates lock into the patented tub with a dual-beveled fit that prevents misassembly. Color-coded by temperature, they work across both Cube and Cube+, less inventory, less cold storage, lower shipping costs.
Closed Tight, Wherever It Travels
The Move stays sealed with a heavy-duty zipper, locking clips, and reinforced corners to protect whatever's inside, plus a padded shoulder strap built to carry the heaviest loads wherever it travels.
Integrated VIP Lid
The lid features a vacuum insulated panel (VIP) and foam that creates an air gap barrier against the tub flange, keeping the same thermal performance as the walls.
The Patented Tub
The five-sided tub works as a system with the PCM plates; it's washable and built to reuse. It protects the VIPs, contains spills, and absorbs impact to meet drop test and real-world requirements.
VIP Wall Panels
Every side is lined with a silica-core vacuum insulated panel, the highest-performing insulation available. Protective foam keeps each VIP secure, dampens vibration, and eliminates air gaps against the tub.
PCM Plates
PCM plates lock into the patented tub with a dual-beveled fit that prevents misassembly. Color-coded by temperature, they work across both Cube and Cube+, less inventory, less cold storage, lower shipping costs.
Closed Tight, Wherever It Travels
The Move stays sealed with a heavy-duty zipper, locking clips, and reinforced corners to protect whatever's inside, plus a padded shoulder strap built to carry the heaviest loads wherever it travels.
One plate family.Eight coolers.
Four plate sizes span the entire range. Move up from a Cube to a Cube+ and your team manages the same refrigerant, less inventory, less to qualify, fewer ways to get it wrong.
Three ranges, one proven bag.
The Move is thermally validated for 96+ hours across frozen, refrigerated, and room temperature ranges, and mechanically proven for transport.
The Move's VIP PCM solution holds steady across ISTA 7D and 7E winter and summer profiles.
3 temperature ranges, frozen, refrigerated, and room temperature, validated for 96+ hours in one bag built to hold steady.
The Move was tested and validated against ISTA 7D and 7E for both winter and summer profiles.
The Move is drop tested to ISTA 3A standard, built to withstand the bumps and drops of real-world handling as a portable cooler.
Move or Move Plus.
Field-ready VIP performance for the shipment that leaves the building.
Standard payload volumes, the Move is built for single-patient routes used in the field for everyday transport, the routine runs where reliability matters as much as capacity.
Built for EMS, hospital, and lab teams, wherever samples and medications demand performance, the Move is ready to go, built to hold its own in the field where a lapse in temperature control isn't an option.
Built to ship.Built to return.Built to last.
Built to protect and built to last. The tub keeps the VIP panels safe, washes clean after every shipment, and the PCM plates recondition and go straight back in. Hundreds of cycles, zero compromise.
Single-use shippers charge you the full system cost every cycle. The Cube charges you for the carton. The VIP panels and PCM plates don’t expire, and they don’t get thrown away after one trip.
5-year tub service life
Service life measured in years, not shipments. Built to handle daily use, the return trip, and everything in between. Every component is tested and designed to maintain performance year after year.
No VIP or PCM expiry
Always effective. Never expired. PCM plates recondition and perform like new, every time. No expiry. No degradation.
Replace parts, not the system
If a component is lost or damaged, order a replacement and keep shipping. Every SteadyPac component is individually replaceable, protecting your investment and keeping your cold chain running.
Documentationis not a follow-up.It’s part of the SKU.
Most cold-chain packaging vendors send the box first and the paperwork second, if at all. TempAid ships the qualification file inside the mailer it documents. Same lane, same date, same signature.
Qualification summary
Lane-specific test results, peak internal margin to spec.
ISTA test report
7D/7E or 3A profile, raw temperature data, lab signature.
GS1-compliant shipping label
Lot, expiry, lane code, temperature class.
Pack-out SOP card
One page, laminated. Insert, seal, ship.
Return and Reuse Guide
PCM mat retrieval, recycling stream per region.
Explore other solutions.
Honest cross-links to the rest of the line. Pick what fits the shipment.
SteadyPac Solo
VIP thermal performance in a single-use corrugated shipper, built for one-way lanes where reverse logistics isn't practical.
Details
SteadyPac Cube
Vacuum panels that survive ISTA 3A drop tests across all corners and edges. Maintain performance during the full five-year lifespan.
Details
SteadyPac EPS
The proven EPS format with a better end of life, biodegradable additive validated to 92% biodegradation (ASTM D5511).
Details
SteadyPac EarthWise
Cold chain performance, blue bin at the end. OCC-E certified curbside-recyclable, ISTA validated to 130+ hours.
Details
SpeedyPac PCM Mailers
Curbside-recyclable mailers with the same PCM plate family, right-sized for single-parcel, last-mile temperature control.
Details
Found what you’re looking for, but have more questions?We can help.
Tell us your route, payload and temperature range. A specialist will match the SteadyPac Move configuration and documentation your cold chain needs.